Analysis Of Good Manufacturing Practices (GMP) Training Information System Design Using Extreme Programming (XP) Methods
DOI:
https://doi.org/10.38035/sjam.v1i4.57Keywords:
Information System, GMP, ManufactureAbstract
This research is about the Good Manufacturing Practices (GMP) Training Information System. Apart from that, the author is trying to carry out an analysis of the design of the Good Manufacturing Practices (GMP) information system. The aim is to carry out tests to reduce problems that exist at the research site, PT employee tools. XYZ for training and GMP tests as well as getting the final results of the GMP tests carried out by employees. The method used in the research is literature study, interviews and observation. The results of this research show that system quality can make it easier to carry out GMP training. So it can be concluded that the resulting value still shows the suitability of the system to be implemented in accordance with the real system.
References
Afrila, A., Rosyidi, D., Ihsan, Moch. N., & Purwadi, P. (2023). Evaluation of Good Manufacturing Practice (GMP), Standard Sanitation Operating Procedure (SSOP) for Traditional Chicken Slaughterhouses In Malang City. Journal Research of Social Science, Economics, and Management, 2(07). https://doi.org/10.59141/jrssem.v2i07.337
Bretaudeau, L., Tremblais, K., Aubrit, F., Meichenin, M., & Arnaud, I. (2020). Good Manufacturing Practice (GMP) Compliance for Phage Therapy Medicinal Products. Frontiers in Microbiology, 11. https://doi.org/10.3389/fmicb.2020.01161
Fried Sinlae, & Samidi. (2021a). Prototipe Sistem Absensi Berbasis Web Dan Mobile Dengan Metode Rapid Aplication Development (Rad). Prosiding SISFOTEK, 5(1), 107–112. http://www.seminar.iaii.or.id/index.php/SISFOTEK/article/view/267
Fried Sinlae, & Samidi. (2021b). Sistem Informasi Inventory Toko Murah PT. XYZ. Prosiding SISFOTEK, 5(1), 113–117. https://www.seminar.iaii.or.id/index.php/SISFOTEK/article/view/268
Levent ALPARSLAN, A. (2022). Basic good manufacturing practices (GMP), special conditions and inspection processes in the Covid19 (SARS-CoV-2) pandemic. Journal of Research in Pharmacy, 26(6)(26(6)), 1527–1538. https://doi.org/10.29228/jrp.247
Maulina Dewi, S., & Anggraeni, L. (2022). Studi Penerapan Good Manufacturing Practices (GMP) Pada Produksi Manisan Pala. Jurnal Sosial Sains, 2(4), 532–537. https://doi.org/10.59188/jurnalsosains.v2i4.386
Pasha, D., Puspaningrum, A. S., & Eka Eritiana, D. I. (2023). Permodelan E-Posyandu Untuk Perkembangan Balita Menggunakan Extreme Programming. Journal of Data Science and Information Systems (DIMIS), 1(1), 1–8. https://doi.org/10.58602/dimis.v1i1.13
Prayitno, S. A., Jumadi, R., & Al Fatina, A. (2023). GOOD MANUFACTURING PRACTICES (GMP) PRODUKSI TEH HITAM (BLACK TEA) DI PTPN XII MALANG JAWA TIMUR. JUSTI (Jurnal Sistem Dan Teknik Industri), 3(3), 343. https://doi.org/10.30587/justicb.v3i3.5526
Pressman, R. S. (2010). Software Engineering?: a practitioner’s approach (R. S. Pressman, Ed.). McGraw-Hill.
Putri, W., Andayani, W., Sutan, S. M., Rucitra, A. L., & Firdausyi, I. A. (2023). Empowerment of siwalan roomie processing small and medium-sized enterprises (SMEs) through strengthening good manufacturing practice (GMP) in Tuban Regency. Jurnal Pengabdian Masyarakat Dan Riset Pendidikan, 1(4), 197–203. https://doi.org/10.31004/jerkin.v1i4.54
Sinlae, F. (2023). NEW EMPLOYEE SELECTION METHOD WEIGHTED PRODUCT AT PT. XYZ. JURTEKSI (Jurnal Teknologi Dan Sistem Informasi), 9(4), 707–714. https://doi.org/10.33330/jurteksi.v9i4.2599
Souto, E. B., Silva, G. F., Dias-Ferreira, J., Zielinska, A., Ventura, F., Durazzo, A., Lucarini, M., Novellino, E., & Santini, A. (2020). Nanopharmaceutics: Part I—Clinical Trials Legislation and Good Manufacturing Practices (GMP) of Nanotherapeutics in the EU. Pharmaceutics, 12(2), 146. https://doi.org/10.3390/pharmaceutics12020146
SUDARYANTININGSIH, C., & PAMBUDI, Y. S. (2022). PENYUSUNAN DRAFT STANDAR OPERASIONAL PROSEDUR (SOP) PRODUKSI TAHU DENGAN PRINSIP GOOD MANUFACTURING PRACTICE (GMP) YANG DISESUAIKAN DENGAN PROTOKOL KESEHATAN COVID-19. JURNAL EKONOMI, SOSIAL & HUMANIORA, 3(10). https://www.jurnalintelektiva.com/index.php/jurnal/article/view/776
Wahyuningsih, N. (2023). Rancang Bangun Sistem Informasi Inventarisasi Barang Menggunakan Metode Extreme Programming. Jurnal Teknologi Terkini (JTT), 3(2), 1–20.
Bretaudeau, L., Tremblais, K., Aubrit, F., Meichenin, M., & Arnaud, I. (2020). Good Manufacturing Practice (GMP) Compliance for Phage Therapy Medicinal Products. Frontiers in Microbiology, 11. https://doi.org/10.3389/fmicb.2020.01161
Fried Sinlae, & Samidi. (2021a). Prototipe Sistem Absensi Berbasis Web Dan Mobile Dengan Metode Rapid Aplication Development (Rad). Prosiding SISFOTEK, 5(1), 107–112. http://www.seminar.iaii.or.id/index.php/SISFOTEK/article/view/267
Fried Sinlae, & Samidi. (2021b). Sistem Informasi Inventory Toko Murah PT. XYZ. Prosiding SISFOTEK, 5(1), 113–117. https://www.seminar.iaii.or.id/index.php/SISFOTEK/article/view/268
Levent ALPARSLAN, A. (2022). Basic good manufacturing practices (GMP), special conditions and inspection processes in the Covid19 (SARS-CoV-2) pandemic. Journal of Research in Pharmacy, 26(6)(26(6)), 1527–1538. https://doi.org/10.29228/jrp.247
Maulina Dewi, S., & Anggraeni, L. (2022). Studi Penerapan Good Manufacturing Practices (GMP) Pada Produksi Manisan Pala. Jurnal Sosial Sains, 2(4), 532–537. https://doi.org/10.59188/jurnalsosains.v2i4.386
Pasha, D., Puspaningrum, A. S., & Eka Eritiana, D. I. (2023). Permodelan E-Posyandu Untuk Perkembangan Balita Menggunakan Extreme Programming. Journal of Data Science and Information Systems (DIMIS), 1(1), 1–8. https://doi.org/10.58602/dimis.v1i1.13
Prayitno, S. A., Jumadi, R., & Al Fatina, A. (2023). GOOD MANUFACTURING PRACTICES (GMP) PRODUKSI TEH HITAM (BLACK TEA) DI PTPN XII MALANG JAWA TIMUR. JUSTI (Jurnal Sistem Dan Teknik Industri), 3(3), 343. https://doi.org/10.30587/justicb.v3i3.5526
Pressman, R. S. (2010). Software Engineering?: a practitioner’s approach (R. S. Pressman, Ed.). McGraw-Hill.
Putri, W., Andayani, W., Sutan, S. M., Rucitra, A. L., & Firdausyi, I. A. (2023). Empowerment of siwalan roomie processing small and medium-sized enterprises (SMEs) through strengthening good manufacturing practice (GMP) in Tuban Regency. Jurnal Pengabdian Masyarakat Dan Riset Pendidikan, 1(4), 197–203. https://doi.org/10.31004/jerkin.v1i4.54
Sinlae, F. (2023). NEW EMPLOYEE SELECTION METHOD WEIGHTED PRODUCT AT PT. XYZ. JURTEKSI (Jurnal Teknologi Dan Sistem Informasi), 9(4), 707–714. https://doi.org/10.33330/jurteksi.v9i4.2599
Souto, E. B., Silva, G. F., Dias-Ferreira, J., Zielinska, A., Ventura, F., Durazzo, A., Lucarini, M., Novellino, E., & Santini, A. (2020). Nanopharmaceutics: Part I—Clinical Trials Legislation and Good Manufacturing Practices (GMP) of Nanotherapeutics in the EU. Pharmaceutics, 12(2), 146. https://doi.org/10.3390/pharmaceutics12020146
SUDARYANTININGSIH, C., & PAMBUDI, Y. S. (2022). PENYUSUNAN DRAFT STANDAR OPERASIONAL PROSEDUR (SOP) PRODUKSI TAHU DENGAN PRINSIP GOOD MANUFACTURING PRACTICE (GMP) YANG DISESUAIKAN DENGAN PROTOKOL KESEHATAN COVID-19. JURNAL EKONOMI, SOSIAL & HUMANIORA, 3(10). https://www.jurnalintelektiva.com/index.php/jurnal/article/view/776
Wahyuningsih, N. (2023). Rancang Bangun Sistem Informasi Inventarisasi Barang Menggunakan Metode Extreme Programming. Jurnal Teknologi Terkini (JTT), 3(2), 1–20.
Downloads
Published
2024-01-29
How to Cite
Sinlae, F., & Yasir, M. (2024). Analysis Of Good Manufacturing Practices (GMP) Training Information System Design Using Extreme Programming (XP) Methods. Siber Journal of Advanced Multidisciplinary, 1(4), 146–153. https://doi.org/10.38035/sjam.v1i4.57
Issue
Section
Articles
License
Copyright (c) 2024 Fried Sinlae, Muhammad Yasir
This work is licensed under a Creative Commons Attribution 4.0 International License.
Copyright :
Authors who publish their manuscripts in this journal agree to the following conditions:
- Copyright in each article belongs to the author.
- The author acknowledges that the Siber Journal of Advanced Multidisciplinary (SJAM) has the right to be the first to publish under a Creative Commons Attribution 4.0 International license (Attribution 4.0 International CC BY 4.0).
- Authors can submit articles separately, arrange the non-exclusive distribution of manuscripts that have been published in this journal to other versions (for example, sent to the author's institutional repository, publication in a book, etc.), by acknowledging that the manuscript has been published for the first time at SJAM.
