Systematic Literature Review (SLR) : Digital Radiography untuk Inspeksi Pengelasan Pipa

Authors

  • Ahdine Windyarti Institut Teknologi Sepuluh Nopember, Surabaya, Indonesia
  • Hosta Ardhyananta Institut Teknologi Sepuluh Nopember, Surabaya, Indonesia

DOI:

https://doi.org/10.38035/jsmd.v4i3.1243

Keywords:

Systematic Literature Review, Nondestructive Test, Digital Radiography, Digital Detector Array, Welding Pipe

Abstract

Perkembangan Digital Radiography (DR) dalam inspeksi pengelasan pipa semakin meningkat seiring kebutuhan industri terhadap metode Nondestructive Testing (NDT) yang lebih cepat, efisien, dan terintegrasi dengan teknologi digital. Penelitian ini bertujuan untuk memetakan perkembangan penelitian DR pada inspeksi pengelasan pipa, mengidentifikasi pendekatan metodologis yang digunakan, serta menganalisis keunggulan, keterbatasan, dan arah pengembangan teknologi. Penelitian menggunakan metode Systematic Literature Review (SLR) dengan mengikuti kerangka The Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) 2020. Pencarian literatur dilakukan menggunakan kombinasi kata kunci terkait Digital Radiography, Digital Detector Array, welding pipe, inspection, testing, dan NDT melalui Google Scholar, PubMed, dan SciSpace. Dari 234 artikel yang diperoleh, setelah proses penghapusan duplikasi, screening, pemeriksaan full-text, serta penerapan kriteria inklusi dan eksklusi, diperoleh 10 artikel yang dianalisis. Hasil menunjukkan bahwa perkembangan penelitian DR pada periode 2023 hingga 2025 bergerak dari digitalisasi inspeksi dan pengembangan detektor menuju otomasi, robotic scanning, serta integrasi Artificial Intelligence (AI). DR menunjukkan keunggulan dalam efisiensi inspeksi, kualitas citra, kecepatan evaluasi, dan pemrosesan data digital, tetapi masih menghadapi tantangan terkait konfigurasi sistem, validasi lintas kondisi, standardisasi, dan kompleksitas teknologi. Penelitian selanjutnya perlu mengarah pada integrasi detektor, inspeksi, otomasi, AI, dan keselamatan radiasi dalam sistem intelligent inspection.

 

Author Biography

Hosta Ardhyananta, Institut Teknologi Sepuluh Nopember, Surabaya, Indonesia

Department of Materials and Metallurgical Engineering, FTIRS, Institut Teknologi Sepuluh Nopember

References

Cao, F., Liu, J., Yang, X., Nie, T., & Wang, S. (2024). 大厚壁管对接焊缝中间焊缝的DR检测技术应用 [Application of DR detection technology for the middle weld seam of butt welds in thick-walled pipes]. 工程施工技术 (Engineering Construction Technology), 2(8), 46–48. https://doi.org/10.33142/ect.v2i8.13007

Chen, L. (2023). In-service detection of high-temperature pressure pipeline welds based on DR technology. Journal of Physics: Conference Series, 2483(1), 012049. https://doi.org/10.1088/1742-6596/2483/1/012049

Feng, Q., Li, R., Nie, B., Liu, S., Zhao, L., & Zhang, H. (2017). Literature review: Theory and application of in-line inspection technologies for oil and gas pipeline girth weld defection. Sensors, 17(1), 50. https://doi.org/10.3390/s17010050

Hou, W., Zhang, D., Wei, Y., Guo, J., & Zhang, X. (2020). Review on computer aided weld defect detection from radiography images. Applied Sciences, 10(5), 1878. https://doi.org/10.3390/app10051878

Kim, D.-S., Heo, S.-H., Heo, S.-U., & Kim, J. (2024). Orbital-rail-type automatic inspection device for pipeline welds using radiation dose prediction results from FLUKA simulation. Applied Sciences, 14(14), 6165. https://doi.org/10.3390/app14146165

Kitchenham, B., Brereton, O. P., Budgen, D., Turner, M., Bailey, J., & Linkman, S. (2009). Systematic literature reviews in software engineering: A systematic literature review. Information and Software Technology, 51(1), 7–15. https://doi.org/10.1016/j.infsof.2008.09.009

Li, L., Zhu, L., Yan, X., Jia, H., Xie, S., & Zou, Y. (2025). The impact of weld repairs on the microstructure and mechanical integrity of X80 pipelines in oil and gas transmission. Processes, 13(2), 512. https://doi.org/10.3390/pr13020512

Liu, C., Hudgins, A., & James, B. (2024). Failure analysis of a ruptured pipeline. Journal of Failure Analysis and Prevention. https://doi.org/10.1007/s11668-024-02071-w

Nurgeldiyev, U., & Yerden, A. U. (2025). Performance analysis of image processing-based robotic scanning systems in detecting weld defects using X-ray digital radiography: A research design. IX International Academic Studies Congress Spring 2025.

Page, M. J., McKenzie, J. E., Bossuyt, P. M., Boutron, I., Hoffmann, T. C., Mulrow, C. D., Shamseer, L., Tetzlaff, J. M., Akl, E. A., Brennan, S. E., Chou, R., Glanville, J., Grimshaw, J. M., Hróbjartsson, A., Lalu, M. M., Li, T., Loder, E. W., Mayo-Wilson, E., McDonald, S., ... Moher, D. (2021). The PRISMA 2020 statement: An updated guideline for reporting systematic reviews. BMJ, 372, n71. https://doi.org/10.1136/bmj.n71

Park, S., Bokhari, I., Alnuaimi, H., Amjad, U., Fleischman, R., & Kundu, T. (2025). Early detection of steel tube welded joint failure using SPC-I nonlinear ultrasonic technique. Structural Health Monitoring, 24(1), 148-163. https://doi.org/10.1177/14759217241235057

Sharma, K., & Kumar, A. (2023). NDE 4.0 automation of digital X-ray (DR system) with AI for crude and gas transportation pipes. International Journal of Science and Research, 12(6), 809–811. https://doi.org/10.21275/MR23604072218

Sharma, K., Kumar, A., Banerjee, D. K., Yadav, V., & Marvel, R. (2025). Advancements in digital and computed radiography for pipe weld inspection: A focus on sensitivity checks and innovative IQI placement techniques. Social Science Research Network. https://doi.org/10.2139/ssrn.5153697

Su, G., Su, X., Wang, Q., Luo, W., & Lu, W. (2025). Research on X-ray weld defect detection of steel pipes by integrating ECA and EMA dual attention mechanisms. Applied Sciences, 15(8), 4519. https://doi.org/10.3390/app15084519

Sutanto, J., Permana, S., Mustari, A. P. A., Santoso, B., Hanurajie, B., & Sumirat, I. (2026). Radiography in industry: Using X-rays for quality control of metals. International Journal on Advanced Science, Engineering and Information Technology, 16(1), 244-251. https://doi.org/10.18517/ijaseit.16.1.21521

Wen, X., Chen, S., Song, K., Yu, H., Li, X., & Zhong, L. (2025). X-ray techniques for defect detection in industrial components and materials: A review. Computers, Materials & Continua, 85(3), 4173–4201. https://doi.org/10.32604/cmc.2025.070906

White, B. S. (2023). Conformable digital detector arrays for nondestructive evaluation. e-Journal of Nondestructive Testing, 28(8). https://doi.org/10.58286/28203

Whittemore, A. R., & Zannoni, E. M. (2025). Applications of Cd(Zn)Te radiation detectors in non-destructive testing and evaluation. Sensors, 25(6), 1776. https://doi.org/10.3390/s25061776

Xu, K., Wang, P., Wang, S., Xie, S., & Wang, B. (2026). Weld seam failure analysis of a natural gas pipeline reducer: Implications for oil and gas transportation safety. Fuels, 7(2), 30. https://doi.org/10.3390/fuels7020030

Wang, X., Zscherpel, U., Tripicchio, P., D’Avella, S., Zhang, B., Wu, J., Liang, Z., Zhou, S., & Yu, X. (2025). A comprehensive review of welding defect recognition from X-ray images. Journal of Manufacturing Processes, 140, 161–180. https://doi.org/10.1016/j.jmapro.2025.02.039

Published

2026-11-15

How to Cite

Windyarti, A., & Ardhyananta, H. (2026). Systematic Literature Review (SLR) : Digital Radiography untuk Inspeksi Pengelasan Pipa. Jurnal Siber Multi Disiplin , 4(3), 1467–1477. https://doi.org/10.38035/jsmd.v4i3.1243